HG Wall & Floor Grout Protector

Grouts between tiles will become dirty and unattractive as a result of mould and lime scale. And when such areas are being cleaned the grouts will become dirty and difficult to clean.

Through the use of this product, the grout will become fully resistant to water, oils, grease and dirt.

A packet is sufficient for approximately 20 m².

The grouts should be clean and dry prior to treatment. First clean the grouts thoroughly, using HG grout cleaner.

After cleaning, rinse all joints well with clean water and allow 24 hours to dry. Sufficient time should be allowed for new grouts to dry and to harden.

Joints in the floors of bathrooms and kitchens and, also, intensively used floors: apply HG super protector for wall and floor grout, using the supplied pipette. Use 1 to 2 ml of liquid per metre of grout (of 0.5 thickness).

Grouts between wall-tiles: apply the HG wall and floor grout super protector to the grouts, using a small brush, until fully absorbed.

Allow to dry for 1 hour. The treatment should be repeated once, so obtaining optimal protection. Excess fluid can be simply removed, using a cloth. After 36 to 48 hours, the treated surface can be cleaned in the normal manner.

For floor grouting, the floor can be used after approx. 3 hours. Floors in showers can be used after approximately 8 hours. 250 ml per 30-40 m2 of floor area (based on floor tiles measuring 30 x 30 cm, and a grout thickness of 0.5 cm).