HG Natural Stone Colour Intensifier (product 48)

Dark stone types are subject to wear and tear after a while, which can be seen as matt, dull, grey coloured walkways or patches.

HG colour intensifier for granite, blue stone and other natural stone types re-enhances the colour of your freestone and brings it back to life.

This unique composition also impregnates, nourishes and protects stone against dirt and staining by water or other liquids. It will not make the surface slippery nor harm the natural breathing process of the stone.

Clean the surface, preferably using HG super remover. Any cement &/or mortar residue should be removed using HG cement grout film remover or HG cement, mortar & efflorescence remover.

For marble, Belgian bluestone and other calciferous stone varieties, use HG marble cement & lime film remover. Leave the surface to dry for 3 days and then apply HG colour intensifier sparingly using a clean non-fluffy cloth.

For larger surfaces, apply HG colour intensifier evenly using a mohair roller and then rub it in using a clean, non-fluffy cloth.

After 10 minutes maximum, the colour enhancer will be absorbed into the stone.

Remove any surplus very carefully using a dry cloth (& possibly turpentine).

On very porous surfaces, repeat the treatment until the surface no longer absorbs the product.

If a glossy surface is required it can be polished after 30-40 minutes.

The stone is walkable again after 4 hours and can bear loads after 3 days.